Latest News and Articles

SACO AEI Polymers Featured Products

By SACO AEI
March 11, 2021 Category: Products

As many of you know, the National Plastics Exposition, the largest show in our industry, takes place every three years. As a result of the ongoing COVID-19 pandemic, the show has been canceled. In lieu of the show, we wanted to take to our blog to showcase the products that we would have featured at the show!

Fine-Blend SMA Coupling Agents

By SACO AEI
March 05, 2021 Category: Coupling Agents

SMA modifiers are used to improve mechanical properties, impact strength, HDT, dimensional stability, heat resistance of polymeric materials, and to help processability in thermoforming.

GT-300 as a Slip Agent in Blown Film

By SACO AEI
February 26, 2021 Category: Masterbatches

Javachem's GT-300 silicone masterbatch offers many processing benefits, including improving flow and coefficient of friction, and works well as a slip agent in processing.

Virtual Processing Support

By SACO AEI
February 15, 2021 Category: Processing Support

Due to the ongoing pandemic, SACO AEI Polymers has implemented a virtual processing support system to continue providing our customers with the highest level of support while keeping both employees and customers safe!

SACO AEI Polymers Transit Market Compounds

By SACO AEI
February 14, 2021 Category: Products

SACO AEI Polymers PEXIDAN HF Low Smoke Zero Halogen Compounds offers the solutions for human safety.

PEXIDAN Aluminum Tree Wire Underground Ruggedized Cable Solutions

By SACO AEI
February 05, 2021 Category: Moisture Cure

The goal of our product is to minimize cable failure rates at the lowest possible cost. We offer a PEXIDAN solution for both Aluminum Tree Wire and underground Ruggedized Cable.

Innovative Low Smoke Zero Halogen Compounds for Fiber Optic Cables

By SACO AEI
January 29, 2021 Category: LSZH Soultions

In this week's blog, we are discussing the SACO AEI Polymers solutions for fiber optic cables, which are used for the new European construction product regulations (CPR.) These regulations took effect on July 1st, 2017.

Sustainability at SACO AEI Polymers

By SACO AEI
January 22, 2021 Category: Sustainability

Sustainability at SACO AEI Polymers is more than just a carbon footprint and responsible environmental policies. We see sustainability as a journey, and the roadmap for that journey is our core values.

SACO AEI Polymers Custom Solutions

By SACO AEI
January 15, 2021 Category: Custom Solutions

SACO AEI Polymers is your go-to for effective, efficient, and confidential custom solutions.

PEXIDAN XLPE Moisture Cure

By SACO AEI
January 08, 2021 Category: Moisture Cure

SACO AEI Polymers is a unique distributor of specialized additives, masterbatches, and compounds, including PEXIDAN, our trademark name for our moisture care XLP.

2020 Year End Recap

By SACO AEI
December 31, 2020 Category: Our Company

2020 was certainly an eventful year- It was full of surprises and challenges for us all, both professionally and personally. Within the distribution company, we had some major changes that have left us well-positioned for the years to come.

Happy Holidays from SACO AEI Polymers

By SACO AEI
December 23, 2020 Category: Our Company

Hi, Im Mike McCormack, the business unit manager of SACO AEI Polymers Distribution. During this holiday season. I want to stop and reflect on what an eventful year weve had. 2020 has been full of surprises and challenges, some good and some not so good. Weve had customers who shut down or scaled back, but some who never missed a beat. Weve had friends and acquaintances who were out of work and others who were busier than theyve ever been. And unfortunately, we know people whose lives were tragically affected by the pandemic, which is still ongoing. However, like me, I hope you will find some time during this holiday season to spend with family and friends to rest, give thanks, give back a little and reflect on things that are truly important. I would encourage you to try to relax, put 2020 behind you and enjoy each others company. Then get ready for an exciting and challenging year ahead. We all know that the only true constant is change and we will be there for you to meet the challenges

XLPE Photovoltaic Solutions

By SACO AEI
December 17, 2020 Category: Photovoltaic

The photovoltaic industry is a very exciting market for us to be a part of as it has been very instrumental in the global fight against climate change. We take a lot of pride in being a part of the solution in this industry during its growth over the last couple of years.

ARMIDAN Impact Modifiers

By SACO AEI
December 04, 2020 Category: Impact Modifiers

ARMIDAN Impact Modifiers are used to improve the deformation and crack resistance of a finished product.

Linxidan Coupling Agents

By SACO AEI
November 27, 2020 Category: Coupling Agents

Linxidan is a coupling agent designed to increase physical properties. We are always working on improving and expanding our portfolio by developing new grades based on linear low density and low density polyethylenes.

Mold Release Improvement with Silicone Masterbatches

By SACO AEI
November 20, 2020 Category: Masterbatches

If you are looking for cost-effective additives to improve the surface appearance of your parts, faster cycle times, better part ejection, and more, SACO AEI Polymers Distribution can help you find the right additives for you!

Improvement in Coefficient of Friction and Nylon W and C

By SACO AEI
November 13, 2020 Category: Masterbatches

Javachem GT-805 silicone masterbatch provides many advantages in the wire and cable manufacturing industry. From reduced die drool to reduced coefficient of friction, and more.

Silicone Masterbatch as an Alternative to Liquid Silicone Rubber

By SACO AEI
November 06, 2020 Category: JavaChem, Masterbatches

At SACO AEI Distribution, we have been looking into providing a more cost-effective, environmentally friendly alternative to the traditional liquid silicone rubber (LSR).

Phlamoon 1090A 75MB

By SACO AEI
October 23, 2020 Category: Masterbatches

Phlamoon 1090A 75MB is a state-of-the-art masterbatch and an intumescent flame retardant additive based on a phosphorous nitrogen compound. The main feature of Phlamoon 1090A 75MB is the thermal stability, stable up to 270 degrees Celsius/ 518 degrees Fahrenheit.

Coefficient of Friction Improvement Using GT-300

By SACO AEI
September 30, 2020 Category: Masterbatches

GT-300 is cost-competitive versus traditional silicone masterbatches. A large market for GT-300 is in decreasing the coefficient of friction on extruded wire and injection molded parts.

Distribution Business Unit

We’re a unique distributor of specialized additives, masterbatches, and compounds.

Shop By Supplier

All Rights Reserved SACO AEI Polymers - Distribution Business Unit ©